|
speciality series machine |
|
 |
CNC speciality series machine MIX-3025
MIX-3025 is a new speciality machine developed with the small customer in mind. Beautifully constructed and compact, the machine is extremely steady with high speed and precision. The machine’s applications vary broadly, from small molds to product label trademarks. It uses the new ARM high speed RISC processor control system, USB memory stick and USB for communications. You can use high capacity flash memory and operate the machine completely offline. The entire machine is optimized with simple to use operations, reduced effort and economical performance .It’s a high functioning, multipurpose machine and comes at a great value.
|
| Parameters |
Name |
MIX-3025 |
Unit |
| Type |
| Working Area(X、Y) |
320x330 |
mm |
| Max Cutting Size |
300x250x98 |
mm |
| Max Cutting Speed |
4.0 |
m/min |
| Resolution |
0.0015 |
mm/step |
| Spindle |
800 |
w |
| Spindle rate |
24000 |
r/min |
| Cutting Tools Diameter |
Φ3.175、Φ4、Φ6 |
mm |
Source power
|
AC220V±10% 50HZ |
v/hz |
| Size (W、L、H) |
750x600x1400 |
mm |
| Weight |
120 |
kg |
| Consumption |
0.2 |
kw |
|
|
 |
The CNC speciality foam/plastic cutter
The speciality foam/plastics cutter is a hot filament cutter which ROC-Mese Co. Ltd. promotes. This machine is characterized by its optimized design, large processing scope, and simple operations. It uses 0.5 millimeter heating wire, which allows quicker heat release and is extremely steady, nimble, agile, and has a high degree of fineness. By using advanced computer design, instead of manually cutting, you now have automated, computer controlled cutting, resulting in much higher efficiency. It is a new machine in the foam cutting industry and can be used in advertising, billboards and the cast iron industry to replace wooden moulds.
|
| Parameters |
Name |
Foam Cutter |
Unit |
| Type |
| Working Area(X;Y) |
1850x600 |
mm |
|
| Max Cutting Size(X;Y;Z) |
1400x1200x500 |
mm |
|
| Max Cutting Speed |
0--1200 |
mm/min |
|
| Wire Diameter |
Φ0.5 |
mm |
| Source power |
AC220V±10%50HZ |
v/hz |
| Size |
1960x1000x1660 |
mm |
|
| Weight |
80 |
kg |
|
| Consumption |
0.8 |
kw |
|
|
 |
CNC the specialized punch press CK-1208-3
CK-1208-3 is new generation of Woodpecker CNC?speciality series machine that is developed by ROC-Mese (Shanghai) Co. Ltd. Based upon our design from 2003, it can punch holes, punch a line on leather and cardboard.It has a cast iron engine bed, which makes it very sturdy and stable and comes with an imported ball screw, which makes it very precise.The spindle is specially designed by our company. With the software that is included, the cutting vector direction can be easily changed as well as cut curves in an extremely smooth fashion. It uses a new DSP high speed chip control system,which makes the operations extremely reliable.It can use various types of special-purpose cutting tools and allows for many different types of designs and characters on leather. The cutting creates extremely clear and fine lines and is perfect for leather goods like shoes, clothing, and handbags. This machine can also create extremely fine lines and designs on cardboard, creating high quality boxes.
|
| Parameters |
Name |
CK-1208-3 |
Unit |
| Type |
| Working Area(X、Y) |
1360x1720 |
mm |
|
| Max Cutting Size(X、Y) |
1200x1200 |
mm |
|
| Wash the head frequency |
5—8 |
c/min |
| Resolution |
0.005 |
mm/step |
Hurtle the bore knife to leave the work set the high degree
|
25 |
mm |
|
| Spindle rate |
24000 |
r/min |
| Cutting Tools Diameter |
Φ4、Φ6、Φ3.175 |
mm |
| Source power |
AC220V±10% 50HZ |
v/hz |
Two five switch on electricity the valve the electric voltage
|
24 |
VDC |
The air cylinder presses strong
|
4—6 |
kg/cm2 |
| Air cylinder work route of travel |
15 |
mm |
| Size (W、L、H) |
1800x2070x1450 |
mm |
|
| Weight |
650 |
kg |
|
| Consumption |
0.8 |
kw |
|
|
